ENERGETIC Custom 256x368mm Double Side Textured PEI Powder Coated Spring Steel Sheet Build Plate for Raise3d E2 Printer Hot Bed

Advantage:

1.Special Design:Double Sided Textured + Smooth PEI Sheet/Double Side Textured PEI,One side textured, one side smooth, two kinds of surface to meet your different printing needs,And One Side Textured PEI plate,Good Adhesion to the PEI surface, easy to remove the prints, flex slightly to pop your print right off.

2.Good Quality:Magnetic, Flexible, Removable Steel Flex PEI Plate,It can stick to magnetics very well. High strength and heat resistance.

3.Easy to Install:PEI spring steel sheet is flat and flexible, it comes without magnetic base, but could be magnetically attracted to the hotbed,because Raise3d E2 3D printer heated bed is magnetic, just put and print.

4.Easy to Clean:PEI 3d printer bed adhesive use a soft cloth to clean the dust. Gently wipe the stain with low concentration of alcohol.

Important Information:

1.Recommend print temps

• PLA – 60C

• HTPLA – 60C

• PETG – 70-80C

• PCTG – 70-80C

• ABS – 100C

2.Product Usage Guidelines

• PETG/PCTG/TPU– If you are not careful with your 1st layer you can risk bonding the PETG/PCTG/TPU to the PEI surface. This will damage the surface. To prevent damage to the surface apply hairspray or PVA gluestick before printing PETG/PCTG/TPU on the PEI

• Part Removal– Make sure your plate is at close to room temp (under 30C) before removing parts. If you remove when hot it more likely to damage the surface

Items Included:

Product1:Blank Steel Plate-Only Blank Steel Plate.

Product2:Textured on one side-one side textured pei surface,other side is blank steel plate,only one side can print.

Product3:Smooth on one side-one side smooth pei surface,other side is blank steel plate,only one side can print.

Notice:

Please tear off Smooth PEI surface’s Protective film before using it.

ENERGETIC Double-Sided PEI Sheet

Textured PEI side

                                     Happy Printing!!!