Homekit APP Matter PC Power Switch Computer Remote Boot Startup Card Telecommuting PICE for Apple Siri Homepod Remote Control

Note:

1.It doesn't work with branded desktop computer,like Apple,Dell and HP etc.

2.Before purchasing, on your computer, enter BIOS Settings/Advanced/APM Configuration and change the option "ErP Ready" to "Disabled". If it cannot be changed, please do not purchase it, otherwise it cannot be used.

Wifi Remote Switch for Desktop Computer

1. Easy Installation
Standard PCIe port, compatible with most destop computer. Easy Installation, don't need any driver software.
2. App Remote Control
Control your computer on Apple Homekit APP anytime any where. Always know the computer status on App.
3. Siri and Homepod Voice Control
By this WIFI remote card. You can use Siri or your Homepod speaker to control your pc.
4.Compatible with most Speaker
Work with Alexa Echo, Google Home Assistant, Smartthings, Yandex Alice, easy to control your PC with simple voice command.
5. Timer and Schedule
Set a timer to power on/off, or make a weekly schedule to power on/off the computer, automate your PC.

Homekit APP Control

App Sync PC Status

Siri Homepod Voice Remote Control

How to install?

Step 1,find Power SW cable and Reset SW cable on mainboard,then pull out them.
Step 2,fix APP remote computer module in free PCIE.
Step 3,Insert the previously pulled out Power Sw and Reset Sw wires into the corresponding positions of the boot card, and insert the Power Sw and Reset Sw wires of the boot card into the corresponding positions of the motherboard.

Specifications

Item type: Computer Remote Boot Card

Interface: PCIE

Wi-Fi standard: matter over wifi, don't support 5G wifi.

Working temperature: -20℃~70℃

Working humidity: ≤80%

Mobile App: Homekit APP on IOS

1.If the computer turn on automatically after it's turned off.

It is because the PCIE card slot has no power and cannot supply power to our equipment. You only need to enter your computer’s “BIOS” setting and set the computer motherboard to remain powered when the computer is shut down to solve the problem.

For example:

(1). On computer, go to BIOS settings/Anvanced/APM Configuration, change the option "ErP Ready" to "Disabled" status and change the option “Power on by PCI-E” to “enabled”.

Note: This is only the setting method for one of the mainboards. Due to too many types of computer mainboards, it is impossible to list them all. Regardless of the type of motherboard, the solution is to keep the motherboard powered after the computer is turned off.

2.What should I do if I can't connect by scanning the QR code?

You can enter code number on home APP directly